# Taking a load cell apart until it makes sense

22 July 2026 · Nanupatruni Mahesh Kumar

Rated output, non-linearity, creep. All of it went on paper first.

A load cell turns force into a number. Wiring one up takes an afternoon, and the readings look convincing straight away.

Whether they still mean the same thing an hour later, in a warmer room, under a weight that has been sitting there a while — that is the part that decides whether a device can be trusted.

## What's actually happening inside

Strain gauges are bonded to a piece of metal shaped to deform predictably under load. As it flexes, the gauges stretch or compress and their resistance shifts very slightly. Wired as a Wheatstone bridge and fed an excitation voltage, those shifts come out as a small differential voltage proportional to the load.

Stress, strain, resistance, millivolts. Nothing exotic about any of it. But at every step, a real cell behaves a little differently from a perfect one.

## The lines on the datasheet that matter

Rated output is how much signal you get at full load, per volt of excitation. It sets how much resolution there is to work with before the electronics have done anything at all.

Non-linearity is how far the cell wanders from a straight line between empty and full, which decides how much of its range is genuinely usable.

Creep is what happens when you leave a constant weight in place and the reading moves anyway. If a device weighs something that sits there, rather than something lifted on and off, it has to account for that.

## Shear beam and bending beam

Mahesh worked through both. They differ in how the metal is made to deform, which changes how they cope when the weight sits off-centre. Outside a laboratory, it usually does.

## Why bother going this deep

We could treat a load cell as a component with a number coming out of it. The reason not to is that when a reading misbehaves — and it will — the difference between a fixable problem and a mysterious one is whether anybody here understands what the sensor is physically doing.

## Related reading

- [Uncalibrated bench characterisation of low-cost turbidity, TDS, pH and level sensors on Arduino Uno R4 WiFi](https://dharanova.com/whitepapers/uncalibrated-water-sensors-arduino-uno-r4-wifi.md) a whitepaper from our lab
- [Signal conditioning](https://dharanova.com/learn/signal-conditioning.md) background on Learn
- [The common sensor families](https://dharanova.com/learn/sensor-families.md) background on Learn

[Read the post on LinkedIn](https://www.linkedin.com/posts/dharanova_dharanova-pioneer-at-work-activity-7485582455312240640-7cby)

[All updates](https://dharanova.com/updates.md)